Mode com MC-6100 Wi-Fi Guía de usuario descargar pdf (Pagina 20)

Configuring your machine for a wireless network (For HL-2135W, HL-2270DW and HL-2275DW)

How to configure your wireless machine, using the one-push wireless setting mode 3

a Make sure that the power cord is plugged in.

b Turn on the machine and wait until the machine is in the Ready state.

c Press the wireless setup button located at the back of the machine for less than 2 seconds as shown in

the illustration below. This will put the machine in one-push wireless setting mode. This feature will

automatically detect which mode your WLAN access point/router uses for one-push configuration (Wi-Fi

Protected Setup or AOSS™).

Note

• Use a pointy object such as a ballpoint pen to press the button.

• If you press the button for 3 seconds or more, the machine will change to the PIN Method of the Wi-Fi

Protected Setup mode. See Using the PIN Method of Wi-Fi Protected Setup on page 18.

d The machine starts the one-push wireless setting mode.

The machine will search for an WLAN access point/router that supports Wi-Fi Protected Setup or

AOSS™ for 2 minutes.

e Put your WLAN access point/router in the Wi-Fi Protected Setup mode or AOSS™, depending on what

is supported by your WLAN access point/router. Please refer to the instruction manual supplied with your

WLAN access point/router.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

Sin comentarios

Mode com MC-6100 Wi-Fi Guía de usuario Pagina 20