Mode com MC-6100 Wi-Fi Guía de usuario descargar pdf (Pagina 23)

Configuring your machine for a wireless network (For HL-2135W, HL-2270DW and HL-2275DW)

e Using a computer that is on the network, type http://access_point_ip_address/ into your

browser. (Where access_point_ip_address is the IP address of the device that is used as the

Registrar

) Go to the WPS (Wi-Fi Protected Setup) setting page and input the PIN from the printed page

to the Registrar and follow the on-screen instruction.

The Registrar is normally the WLAN access point/router.

Note

The setting page is different, depending on the brand of WLAN access point/router. See the instruction

supplied with your WLAN access point/router.

Windows Vista

/Windows

7 3

If you are using your computer as a Registrar, follow these steps:

Note

• To use a Windows Vista

or Windows

7 computer as a Registrar, you need to register it to your network

in advance. See the instruction supplied with your WLAN access point/router.

• If you use Windows

7 as a Registrar, you can install the printer driver after the wireless configuration by

following the on-screen instructions. If you want to install the full driver and software package, follow the

steps in Quick Setup Guide for installation.

1 (Windows Vista

)

Click the button and then Network.

(Windows

Click the button and then Devices and Printers.

2 (Windows Vista

)

Click Add a wireless device.

(Windows

Click Add a device.

3 Choose your machine and click Next.

4 Input the PIN from the printed page and then click Next.

5 Choose your network that you want to connect to, and then click Next.

6Click Close.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Sin comentarios

Mode com MC-6100 Wi-Fi Guía de usuario Pagina 23